CNPC USA

TriDon™ - 6-1/2

For detailed specifications and technical information, download the product brochure.

Contact Information

If you have any questions about this product, please contact us:

Email: chris.cheng@cnpcusa.com

Phone: +1 (713) 972-6518

Address: 2901 Wilcrest Drive, Suite 600, Houston, TX 77042

TriDon™ - 6-1/2" Premium PDC Drillbit

The TriDon series of drill bits are custom-designed drill bits utilizing application-specific cutters to maximize efficiency while drilling hard and abrasive formation types. TriDon series drill bits have had success as the top-performing drill bit in terms of both ROP (Rate of Penetration) and footage drilled in several different formation types globally.

Application

  • Hard and abrasive formation types
  • Suitable for all rotary and motor applications
  • Flowrates between 250 and 500 GPM (0.95 – 1.89 m³/min)
  • Weight on Bit up to 32,000 lbs. (14,234 daN)
  • Makeup Torques between 5,200 and 8,600 ft-lbs. (7,050 – 11,660 Nm)
    • feature and Benefits

      • T - TriDon are optimized geometry cutters to increase ROP in tough applications
      • I - Impact Resistant Cutters
      • L - Strategically placed tool control elements
      • X - Backup Cutters reinforce durability when you need the most
      • U - Up-drill Cutters placed in key locations to reduce issues while tripping out
      • CFD - Computational fluid dynamics analysis is performed to boost hole cleaning

      Specifications

      Cutter Size (mm) Total Cutter Count Connection (inch) Nozzle 1 Qty/Type Junk Slot Area (inch²/cm²) Gage Pad Length (inch/mm) Make Up Length (inch/mm) Shank Diameter (inch/mm) IADC Code
      13 50 3-1/2 API Reg 3 – Series 50 5.8 / 37.4 3 / 75 10.2 / 259.3 4.9 / 124.5 M333
      Backup Cutter Size (mm) Face Cutter Count Nozzle 2 Qty/Type
      13 35 -

      *NOTE: Backup Cutters are an optional built-in feature.

← Back to Products